27

2021

-

09

Cutting and Handling of Cement Fiberboard


In the modern construction industry, the use of building panels is increasing. Fiber cement boards can be used in a wide variety of applications. Thanks to the strong market demand for fiber cement boards, numerous manufacturers have emerged. So, what should customers keep in mind when handling fiber cement boards after purchase?

In the modern construction industry, building panels are being used more and more frequently. Fiber cement boards can be employed in a wide variety of applications. Thanks to the strong market demand for fiber cement boards, numerous manufacturers have emerged. So, what should customers keep in mind when handling fiber cement boards after purchase?
Fiber cement boards are relatively heavy, so moving uncut, whole panels requires at least two people to carry them together.
Plates with a thickness of 4–6 mm are considered relatively thin. Compared to thicker plates, thin plates are more fragile and require careful handling during transportation; if proper protection is not taken, they can easily crack and become damaged.
After the customer makes a purchase, the manufacturer places fiber cement boards neatly on racks at the bottom of the cargo compartment during loading and transportation, then covers the top with protective fabric and secures it to prevent any movement during transit.
When unloading goods using a forklift, it’s important to move steadily and slowly.
Installing cement boards requires at least two people working together: one person stabilizes the board in place, while the other uses specialized nails to secure it.
The tools commonly used to cut fiber cement boards are electric saws and mechanical knives, and there are three cutting methods:
1. Thin sheets can be cut and broken using relatively heavy cutting tools.
2. Use a fiber cutting machine.
3. Thick boards or high‑density boards should be cut using a power saw. During the cutting process, pay attention to the direction of the cut to avoid inhaling dust. Be sure to wear a dust mask or specialized protective equipment, and use water during cutting to minimize dust dispersion.
After cutting is completed, proceed with installation. Once installation is finished, the surface of the board can be decorated with paint (the exposed surface must be treated with a *‑resistant coating). After the boards are securely fastened, the joints between them should be filled with wood filler, and the entire board surface should be coated with paint—this will help extend its service life.
Once installed and securely fixed, and after being painted, subsequent maintenance requires minimal effort. Thick boards and high‑density boards offer excellent impact resistance, while thin boards and low‑density boards need protection from external impacts.