27

2021

-

09

What are the differences between fiber cement boards and calcium silicate boards?


Fiber-cement pressure boards are made by pulping cement, fibers, and other raw materials, then forming the pulp into sheets and pressing them under a press with several thousand tons of force. Calcium silicate boards, on the other hand, are produced by pulping siliceous and calcareous materials together with fiber additives, after which chemical reactions occur under low-temperature conditions. Therefore, there are significant differences between the two, primarily in the following aspects:

The Difference Between Fiber Cement Pressure Boards and Calcium Silicate Boards

Fiber-cement pressure boards are made by pulping cement, fibers, and other raw materials, then forming the pulp into sheets and pressing them under a press with several thousand tons of force. Calcium silicate boards, on the other hand, are produced by pulping siliceous and calcareous materials together with fiber additives, after which chemical reactions occur under low-temperature conditions. Therefore, there are significant differences between the two, primarily in the following aspects:

1. From the perspective of the original materials, the main difference between calcium silicate boards and fiber cement pressure boards lies in the calcium silicate.

The slab contains little cement; sand and fly ash are used as substitutes for cement.

2. Fiber cement pressure boards are physical products, while calcium silicate boards are chemical products.

3. Fiber cement pressure boards are produced using a press, while calcium silicate boards are not.

Calcium silicate boards are autoclaved, while fiber cement pressure boards are not.

4. Fiber cement pressure boards have a higher density than calcium silicate boards, with a density of 1.5 g/cm³ for fiber cement pressure boards.

Above, the density of calcium silicate board is around 1.2 g/cm³.

5. Fiber cement pressure boards can be manufactured in thicknesses ranging from 2.5 to 100 mm, whereas calcium silicate boards cannot be produced in panels thinner than 4 mm or thicker than 30 mm—most standard calcium silicate board manufacturers are limited to thicknesses between 6 and 12 mm.

6. The color of fiber cement pressure boards used for normal applications is the natural color of cement, while calcium silicate boards are white.