09

2021

-

09

Current Status and Analysis of the Calcium Silicate Board/Fiber Cement Board Industry


1. Environmental protection and energy conservation are failing to keep pace with national requirements. Many enterprises still fail to achieve zero wastewater discharge, and clean production needs further improvement. Dust concentrations in workshops remain relatively high, and recovery efficiency is rather poor. This is mainly due to the lack of advanced reprocessing technologies for environmental protection and cleanliness, as well as inadequate implementation of energy-saving and emission-reducing practices in production and manufacturing.

  1. Environmental protection and energy conservation are failing to keep pace with national requirements. Many enterprises still fail to achieve zero wastewater discharge, and clean production needs further improvement. Dust concentrations within workshops remain relatively high, and recovery efficiency is rather poor. This is mainly due to the lack of advanced reprocessing technologies for environmental protection and cleanliness, as well as inadequate implementation of energy-saving and emission-reducing practices in production and manufacturing.

  2. Most companies have relatively low single-line production capacity (though recently many enterprises have been upgrading and replacing their equipment with automated systems, such as Shandong Lutai, Zhejiang Hailong, Fujian JinQiang, Jiangsu AifuXi, and Kunming Huachengxing). According to incomplete statistics, we currently operate 163 production lines, each with an average capacity of just over 3 million square meters. Compared with overseas counterparts, our single-line capacity is relatively low, our scale is small, our energy consumption is high, and we rely on a large workforce.

  3. Insufficient investment in product and technology innovation has led to fierce, homogenous competition. Some companies, in the course of their marketing efforts, have been passing off inferior products as high‑quality ones, disrupting market order. I’d like to highlight Guangzhou Aite Company, which has consistently focused on developing new application areas for its products while prioritizing quality above all else, bringing positive momentum to our industry. Then there’s Fujian JinQiang, which is pioneering new application fields and expanding into emerging markets for innovative products; there’s also New Elements, which takes a differentiated product strategy and avoids price wars; and JinTe, which remains committed to excellence in interior wall coatings… Through these efforts, during the nation’s macro‑economic adjustments, these companies have transformed the “new normal” of the economy into a new standard, continuously refining their business strategies while staying true to their core principles.

  4. Insufficient emphasis is placed on product quality. Different products should be manufactured for different application environments, leveraging the unique characteristics of each product in a targeted manner. The requirements for interior wall coatings differ from those for exterior wall coatings: exterior walls are exposed to direct sunlight, wind, and rain, while interior walls are not; exterior walls may endure frost down to several dozen degrees below zero, whereas interior walls never experience temperatures below freezing (since there are no subzero conditions in winter). Despite these differences, some companies use the same formulation for all their products, applying them to various outdoor environments. This practice is extremely risky—should any issues arise, it could deal a devastating blow to the entire industry.

  We hope that all business leaders will pay attention to the application environment when selling products, adjust formulations, strengthen production process management, and prioritize product quality.

  III. Areas of Engagement in Recent Years

  1. Calcium silicate boards/fiber cement boards will be used outdoors and are increasingly trending toward integrated decorative and thermal insulation solutions. Some are employed in composite interior partition walls, replacing red bricks in indoor partitions (Hebei Province has begun enforcing a policy this year prohibiting the use of red bricks in wall construction). Others are used in outdoor landscaping and public facilities such as tunnels, subway stations, fire access routes, and high‑speed rail sound barriers. A portion is also utilized for interior decoration, with application areas continually expanding.

  2. With the implementation of China’s New Four Modernizations, the successive advancement of urbanization, the establishment of the Asian Infrastructure Investment Bank, and substantial investments in major infrastructure projects, the industry has been showered with favorable conditions, opening up new application areas and ushering in a springtime of development.

  3. Our industry is closely tied to real estate policy. The recent adjustments to real estate policies by the state have brought us positive news: the down payment ratio for second homes has been lowered, and mortgage interest rates have decreased; in addition, banks’ reserve requirements have been cut by one percentage point—both of these developments are highly commendable.

  IV. Recommendations

  1. We hope our company will engage in cross-industry competition, comparing our cost performance with that of decorative materials such as tiles, marble, and granite—rather than engaging in price wars within the same industry—and instead focus on expanding the overall market pie. In the second half of this year, we plan to host a small exchange and communication session with architectural designers, enabling them to gain a better understanding of our decorative effects and broadening the scope of our applications.

  2. Enterprises must stay true to themselves, build their own brands, pursue product differentiation, break through homogeneous competition, and showcase the unique features of their products.

  3. Strengthen enterprises’ innovation capabilities, focus on material properties and production management, reduce energy consumption, prioritize environmental protection, and create room for increased profitability.